How it works: A three-dimensional cross-linked structure with microscopic hooks embedded into the fiber. Gently lower the stylus onto the foam block then lift it. The stylus beds into the foam and when lifted the hooks catch onto and gently remove dirt particles.

Our Bren1 Stylus Cleaner is easy to use!  Similar to the Zerodust method except it removes more than dust and it's much less expensive.  This product also includes a way to clean the cantilever. My daughter Taylor Bren and I build and package this. 

"Was listening to a record today and the left channel kept disappearing - used the zerodust - it was just to hand at the time - and played record again - still the left channel kept fading in/out. used your cleaner and hey presto left channel working just fine - your little pad obviously grabbed something off the stylus that the zerodust didn't. i was almost going to send the record back thinking it was a mis-press! You get my highest recommendation!"

 You will receive:

• one inch square block that has a non metallic ballast on the bottom, place this on platter or plinth and lower the stylus onto it using only the weight of tonearm. Refresh block occasionally by trimming 1/16 th off the top with a razor. I do this twice yearly.             
• one pre-made swab for cleaning the cantilever. removes the green / yellow waste vinyl material.
• extra loose material to use as you wish, make your own swabs, clean terminations etc.  many uses, get creative!
• one brush to remove dust and lint before using cleaner.
• Instructions.  

For leveling equipment stands, plinth, and platter. 
Precision accurate vials in a durable composite housing
2 1/4" X 1 3/4"   free ship with other purchases

                              

For information on our Bren1 Record Clamps, click on picture below